docs: LNA A/B result (41 dB), timing instrumentation, README; close open questions

This commit is contained in:
Lars Nolden
2026-09-01 11:17:04 +02:00
parent 9c028267ef
commit 26fab7202a
6 changed files with 257 additions and 14 deletions
+12 -3
View File
@@ -66,8 +66,18 @@
with alignment error median 1.3 ms (max 3.6 ms) and burst duration within
0.5 ms (median) of the computed airtime. Firmware repeat delay measured
200.0 ms min/median/max against a 200 ms setting.
- Firmware TX reliability over 600 s: tx_attempts 58, tx_success 58,
tx_timeout 0, tx_failures 0, recoveries 0.
- Firmware TX reliability: 58/58 TX success over 600 s and 72/72 over
1200 s; tx_timeout 0, tx_failures 0, radio recoveries 0, MCU resets 0.
- The KCT8103L RX path is essential: holding CSD low in RX costs ~41 dB of
chip-referred level and drops the visible meter population from 18 to 1
(600 s per arm, docs/RF_FRONTEND_TESTS.md). No evidence of excessive
front-end gain hurting at this site.
- Repeat-delay accuracy: +1 to +8 us against a 200 ms setting across 72
repeats. RX deaf time per repeat ~225.7 ms median, of which 12.2 ms is
the fixed-255-byte RX tail and 13.4 ms the TX airtime (docs/TIMING.md).
- The SX1262 GFSK engine cannot express wM-Bus length semantics, so RX uses
a fixed 255-byte capture; RxDone therefore fires 9.4-17.1 ms after the
real end of frame and the firmware reconstructs the true timestamp.
- The observer, not the repeater, limits repeat DECODING. In the dongle's
full-sensitivity state our TX arrives ~36 dB stronger than meter traffic
and reaches RTL-SDR full scale; rtl-wmbus then receives our repeat with
@@ -101,7 +111,6 @@
## NEEDS TESTING
- LNA on/off comparison (`set fem_rx_csd 0|1` hook exists, not yet measured).
- Narrower RX bandwidth (156 kHz) vs current 234.3 kHz on weak meters.
- Long-run stability at >=100 and >=500 verified repeat events.
- Early-stop RX (poll GetRxBufferStatus) to cut the ~20 ms deaf tail.