docs: LNA A/B result (41 dB), timing instrumentation, README; close open questions

This commit is contained in:
Lars Nolden
2026-09-01 11:17:04 +02:00
parent 9c028267ef
commit 26fab7202a
6 changed files with 257 additions and 14 deletions
+13 -5
View File
@@ -5,14 +5,22 @@
drifted meters?
- Preamble detector length: 8 bits chosen for sensitivity; false-sync rate
in the field? (false syncs cost ~20 ms deaf time each at fixed-255 RX).
- Does the KCT8103L LNA help or hurt with strong 868 MHz interferers?
(see planned docs/RF_FRONTEND_TESTS.md)
- RX dead time during retransmit: measured distribution?
- CLOSED: Does the KCT8103L LNA help or hurt with strong 868 MHz
interferers? -> It helps decisively. CSD low costs ~41 dB and reduces
visible meters from 18 to 1; no overload degradation observed
(docs/RF_FRONTEND_TESTS.md).
- CLOSED: RX dead time during retransmit -> ~225.7 ms median at a 200 ms
repeat delay, of which 12.2 ms is the fixed-255 RX tail and 13.4 ms the
TX airtime (docs/TIMING.md). Early-stop RX would cut the tail.
- Can the SX1262 re-arm RX fast enough to catch a meter's immediate
follow-up telegram after our TX?
- Exact production repeater framing/hop requirements (EN 13757-5).
- Regulatory duty-cycle budget for a production repeater at 868.95 MHz.
- Modulation shaping for TX: none vs GFSK BT=0.5 — which does rtl-wmbus /
real receivers prefer? (TX currently unshaped 2-FSK.)
- Why did the R820T PLL wedge? (usbreset workaround in place; root cause
unknown, suspected rtl_test direct-sampling probe.)
- Why does the R820T degrade and eventually die during streaming? Three
failure modes are characterised in docs/HARDWARE.md; `usbreset` recovers
the first two, the third needs a physical replug. Root cause unknown
(thermal suspected). The `rtl_test -t` theory was DISPROVEN.
- Can the SX1262 RX be stopped early (poll GetRxBufferStatus after
SyncWordValid) to remove the ~12 ms fixed-capture tail?