docs: design note for future OLED/button local feedback; add display+button to signal wishlist

This commit is contained in:
Lars Nolden
2026-09-01 13:16:34 +02:00
parent b9d5a6138f
commit 3414e850b8
3 changed files with 191 additions and 0 deletions
+5
View File
@@ -14,3 +14,8 @@ ESP_USB_DP,ESP32-S3,20,bidir,3.3,false,false,false,true,flash/console
RADIO_VDD_SENSE,SX1262,,analog,3.3,false,true,true,false,current sense to confirm PA activity during TX
LOG_UART_TX,ESP32-S3,43,output,3.3,false,false,true,true,always-on boot/log output independent of native USB
RF_TAP,antenna,,rf,,false,false,true,false,conducted measurement port with fixed attenuator to avoid observer overload
OLED_SDA,SSD1306,17,bidir,3.3,false,false,true,true,local status UI; must not share a bus with RF-critical peripherals
OLED_SCL,SSD1306,18,output,3.3,false,false,true,true,local status UI
OLED_RST,SSD1306,21,output,3.3,false,false,true,false,display enable/reset; LOW then HIGH with 50ms settle
VEXT_EN,board,36,output,3.3,false,false,true,false,active-low external rail powering the display; verify what else it gates
BTN_USR,ESP32-S3,0,input,3.3,true,false,true,true,user button; also BOOT strap so unusable for boot-time gestures
1 signal device gpio direction voltage interrupt timing_critical test_point_required header_required reason
14 RADIO_VDD_SENSE SX1262 analog 3.3 false true true false current sense to confirm PA activity during TX
15 LOG_UART_TX ESP32-S3 43 output 3.3 false false true true always-on boot/log output independent of native USB
16 RF_TAP antenna rf false false true false conducted measurement port with fixed attenuator to avoid observer overload
17 OLED_SDA SSD1306 17 bidir 3.3 false false true true local status UI; must not share a bus with RF-critical peripherals
18 OLED_SCL SSD1306 18 output 3.3 false false true true local status UI
19 OLED_RST SSD1306 21 output 3.3 false false true false display enable/reset; LOW then HIGH with 50ms settle
20 VEXT_EN board 36 output 3.3 false false true false active-low external rail powering the display; verify what else it gates
21 BTN_USR ESP32-S3 0 input 3.3 true false true true user button; also BOOT strap so unusable for boot-time gestures