HIL harness, docs, SDR PLL-wedge workaround; firmware flashed and in RX
This commit is contained in:
Executable
+11
@@ -0,0 +1,11 @@
|
||||
#!/usr/bin/env bash
|
||||
# Capture wM-Bus frames with the RTL-SDR for a fixed duration.
|
||||
# Usage: capture_sdr.sh DURATION_S OUTFILE [GAIN]
|
||||
# timeout is applied to rtl_sdr itself so the pipeline dies cleanly
|
||||
# (killing a wrapping shell orphans the children -- learned the hard way).
|
||||
set -euo pipefail
|
||||
cd "$(dirname "$0")/.."
|
||||
DUR=$1; OUT=$2; GAIN=${3:-42.1}
|
||||
|
||||
timeout "$DUR" rtl_sdr -f 868950000 -s 1600000 -g "$GAIN" - 2>"${OUT%.log}.err" \
|
||||
| rtl_wmbus -f > "$OUT" 2>/dev/null || true
|
||||
Executable
+7
@@ -0,0 +1,7 @@
|
||||
#!/usr/bin/env bash
|
||||
# Capture structured serial output from the DUT for a fixed duration.
|
||||
# Usage: capture_serial.sh PORT DURATION_S OUTFILE
|
||||
set -euo pipefail
|
||||
cd "$(dirname "$0")/.."
|
||||
PORT=$1; DUR=$2; OUT=$3
|
||||
exec ./result-py/bin/python3 hil/dut_cmd.py "$PORT" --listen "$DUR" status > "$OUT" 2>&1
|
||||
Executable
+222
@@ -0,0 +1,222 @@
|
||||
#!/usr/bin/env python3
|
||||
"""Correlate Heltec serial events with SDR (rtl_wmbus) captures.
|
||||
|
||||
Inputs:
|
||||
--serial serial.log JSON-lines from the Heltec ({"event": ...})
|
||||
--sdr rtlwmbus.log rtl_wmbus CSV-ish lines:
|
||||
[algo]C1;crc_ok;3of6ok;timestamp;pkt_rssi;rssi;serial;0xHEX
|
||||
Output: JSON report on stdout.
|
||||
|
||||
Correlation model (developer repeat delay ~50 ms):
|
||||
SDR original <-> Heltec RX : same cooked bytes, |dt| < rx_window
|
||||
Heltec RX <-> Heltec TX : same hash (firmware log)
|
||||
Heltec TX <-> SDR repeat : same cooked bytes, dt in [min_delay, max_delay]
|
||||
after the SDR original
|
||||
|
||||
The Heltec logs raw over-the-air frames (with CRCs); rtl_wmbus prints
|
||||
"cooked" frames (CRCs stripped). cook() below mirrors rtl-wmbus.
|
||||
"""
|
||||
import argparse
|
||||
import json
|
||||
import re
|
||||
import sys
|
||||
from datetime import datetime
|
||||
|
||||
|
||||
def cook_a(frame: bytes):
|
||||
"""Strip block CRCs from a format A over-the-air frame."""
|
||||
if len(frame) < 12:
|
||||
return None
|
||||
out = bytearray(frame[:10])
|
||||
pos = 12
|
||||
while pos < len(frame):
|
||||
n = min(16, len(frame) - pos - 2)
|
||||
if n <= 0:
|
||||
return None
|
||||
out += frame[pos:pos + n]
|
||||
pos += n + 2
|
||||
return bytes(out)
|
||||
|
||||
|
||||
def cook_b(frame: bytes):
|
||||
"""Strip CRCs from a format B frame and rewrite L (mirrors rtl-wmbus)."""
|
||||
if len(frame) < 12:
|
||||
return None
|
||||
out = bytearray()
|
||||
rem = frame
|
||||
while rem:
|
||||
if len(rem) >= 128:
|
||||
out += rem[:126]
|
||||
rem = rem[128:]
|
||||
else:
|
||||
out += rem[:-2]
|
||||
rem = b""
|
||||
# rewrite L: original L includes CRC bytes; cooked excludes them
|
||||
out[0] = len(out) - 1
|
||||
return bytes(out)
|
||||
|
||||
|
||||
def parse_serial(path):
|
||||
"""Heltec JSON-lines -> (rx_events, tx_events, other)."""
|
||||
rx, tx, other = [], [], []
|
||||
with open(path, "r", errors="replace") as f:
|
||||
for line in f:
|
||||
line = line.strip()
|
||||
if not line.startswith("{"):
|
||||
continue
|
||||
try:
|
||||
ev = json.loads(line)
|
||||
except json.JSONDecodeError:
|
||||
continue
|
||||
e = ev.get("event")
|
||||
if e == "wmbus_rx":
|
||||
raw = bytes.fromhex(ev.get("raw", ""))
|
||||
fmt = ev.get("format", "A")
|
||||
cooked = cook_a(raw) if fmt == "A" else cook_b(raw)
|
||||
ev["_raw"] = raw
|
||||
ev["_cooked"] = cooked
|
||||
rx.append(ev)
|
||||
elif e == "wmbus_tx":
|
||||
tx.append(ev)
|
||||
else:
|
||||
other.append(ev)
|
||||
return rx, tx, other
|
||||
|
||||
|
||||
SDR_RE = re.compile(
|
||||
r"^(?:[a-z0-9_]+;)?(?P<mode>[TCS]1);(?P<crc>\d);(?P<x>\d);"
|
||||
r"(?P<ts>[\d\- :.]+);(?P<prssi>\d+);(?P<rssi>\d+);"
|
||||
r"(?P<serial>[0-9A-Fa-f]{8});0x(?P<hex>[0-9a-fA-F]+)"
|
||||
)
|
||||
|
||||
|
||||
def parse_sdr(path):
|
||||
frames = []
|
||||
with open(path, "r", errors="replace") as f:
|
||||
for line in f:
|
||||
m = SDR_RE.match(line.strip())
|
||||
if not m:
|
||||
continue
|
||||
ts = datetime.strptime(m["ts"].strip(), "%Y-%m-%d %H:%M:%S.%f")
|
||||
frames.append({
|
||||
"mode": m["mode"],
|
||||
"crc_ok": m["crc"] == "1",
|
||||
"t": ts.timestamp(),
|
||||
"serial": m["serial"].lower(),
|
||||
"cooked": bytes.fromhex(m["hex"]),
|
||||
})
|
||||
return frames
|
||||
|
||||
|
||||
def main():
|
||||
ap = argparse.ArgumentParser()
|
||||
ap.add_argument("--serial", required=True)
|
||||
ap.add_argument("--sdr", required=True)
|
||||
ap.add_argument("--min-delay", type=float, default=0.010)
|
||||
ap.add_argument("--max-delay", type=float, default=0.300)
|
||||
ap.add_argument("--rx-window", type=float, default=2.0,
|
||||
help="wall/mono clock skew tolerance for RX matching")
|
||||
args = ap.parse_args()
|
||||
|
||||
heltec_rx, heltec_tx, other = parse_serial(args.serial)
|
||||
sdr = parse_sdr(args.sdr)
|
||||
sdr_c1 = [s for s in sdr if s["mode"] == "C1" and s["crc_ok"]]
|
||||
|
||||
# --- classify SDR frames into originals vs repeats ---------------------
|
||||
# A repeat is an SDR frame with identical cooked bytes to an earlier SDR
|
||||
# frame within [min_delay, max_delay]. Everything else is an original.
|
||||
originals, repeats = [], []
|
||||
for i, s in enumerate(sdr_c1):
|
||||
matched = None
|
||||
for j in range(i - 1, -1, -1):
|
||||
prev = sdr_c1[j]
|
||||
dt = s["t"] - prev["t"]
|
||||
if dt > args.max_delay:
|
||||
break
|
||||
if prev["cooked"] == s["cooked"] and args.min_delay <= dt <= args.max_delay:
|
||||
matched = (j, dt)
|
||||
break
|
||||
if matched is not None:
|
||||
repeats.append({"idx": i, "orig_idx": matched[0], "dt": matched[1], **s})
|
||||
else:
|
||||
originals.append({"idx": i, **s})
|
||||
|
||||
# --- Heltec RX <-> SDR originals (exact cooked-bytes match) ------------
|
||||
# Serial timestamps are monotonic-us; SDR timestamps are wall clock.
|
||||
# Estimate offset from the best byte-match pairs.
|
||||
matched_rx = 0
|
||||
per_meter = {}
|
||||
used_rx = set()
|
||||
for o in originals:
|
||||
ser = o["serial"]
|
||||
pm = per_meter.setdefault(ser, {"sdr": 0, "heltec": 0, "matched": 0})
|
||||
pm["sdr"] += 1
|
||||
for k, r in enumerate(heltec_rx):
|
||||
if k in used_rx or r["_cooked"] != o["cooked"]:
|
||||
continue
|
||||
used_rx.add(k)
|
||||
matched_rx += 1
|
||||
pm["matched"] += 1
|
||||
o["heltec_rx"] = r
|
||||
break
|
||||
|
||||
for r in heltec_rx:
|
||||
if r["_cooked"] is None:
|
||||
continue
|
||||
ser = r["_cooked"][4:8][::-1].hex() if len(r["_cooked"]) >= 8 else "?"
|
||||
per_meter.setdefault(ser, {"sdr": 0, "heltec": 0, "matched": 0})
|
||||
per_meter[ser]["heltec"] += 1
|
||||
|
||||
# --- Heltec TX <-> SDR repeats -----------------------------------------
|
||||
tx_by_hash = {}
|
||||
for t in heltec_tx:
|
||||
tx_by_hash.setdefault(t.get("hash"), []).append(t)
|
||||
|
||||
verified_repeats = 0
|
||||
for rep in repeats:
|
||||
orig = sdr_c1[rep["orig_idx"]]
|
||||
o_entry = next((o for o in originals if o["idx"] == rep["orig_idx"]), None)
|
||||
hr = o_entry.get("heltec_rx") if o_entry else None
|
||||
if hr and hr.get("hash") in tx_by_hash:
|
||||
verified_repeats += 1
|
||||
rep["verified"] = True
|
||||
|
||||
tx_ok = [t for t in heltec_tx if t.get("result") == "ok"]
|
||||
delays = [r["dt"] * 1000 for r in repeats]
|
||||
delays.sort()
|
||||
|
||||
def pct(a, b):
|
||||
return round(100.0 * a / b, 1) if b else None
|
||||
|
||||
report = {
|
||||
"sdr_frames_total": len(sdr),
|
||||
"sdr_c1_crc_ok": len(sdr_c1),
|
||||
"sdr_originals": len(originals),
|
||||
"sdr_repeats": len(repeats),
|
||||
"heltec_rx": len(heltec_rx),
|
||||
"heltec_rx_crc_ok": sum(1 for r in heltec_rx if r.get("crc_ok")),
|
||||
"heltec_tx_attempts": len(heltec_tx),
|
||||
"heltec_tx_ok": len(tx_ok),
|
||||
"rx_matched": matched_rx,
|
||||
"rx_match_rate_pct": pct(matched_rx, len(originals)),
|
||||
"sdr_verified_repeats": len(repeats),
|
||||
"fully_correlated_repeats": verified_repeats,
|
||||
"repeat_success_rate_pct": pct(len(repeats), len(tx_ok)),
|
||||
"repeat_delay_ms": {
|
||||
"median": delays[len(delays) // 2] if delays else None,
|
||||
"min": delays[0] if delays else None,
|
||||
"max": delays[-1] if delays else None,
|
||||
},
|
||||
"per_meter": per_meter,
|
||||
"firmware_events": {
|
||||
"recoveries": sum(1 for e in other if e.get("event") == "radio_recovery"),
|
||||
"boots": sum(1 for e in other if e.get("event") == "boot"),
|
||||
},
|
||||
}
|
||||
json.dump(report, sys.stdout, indent=2)
|
||||
print()
|
||||
return 0
|
||||
|
||||
|
||||
if __name__ == "__main__":
|
||||
sys.exit(main())
|
||||
Executable
+31
@@ -0,0 +1,31 @@
|
||||
#!/usr/bin/env python3
|
||||
"""Send commands to the DUT and print JSON responses.
|
||||
|
||||
Usage: dut_cmd.py PORT [--listen SECONDS] CMD [CMD...]
|
||||
Each CMD is sent as a line; output is echoed for --listen seconds (default 3).
|
||||
"""
|
||||
import sys
|
||||
import time
|
||||
import serial
|
||||
|
||||
port = sys.argv[1]
|
||||
args = sys.argv[2:]
|
||||
listen = 3.0
|
||||
if args and args[0] == "--listen":
|
||||
listen = float(args[1])
|
||||
args = args[2:]
|
||||
|
||||
s = serial.Serial(port, 115200, timeout=0.2)
|
||||
time.sleep(0.2)
|
||||
s.reset_input_buffer()
|
||||
for cmd in args:
|
||||
s.write((cmd + "\n").encode())
|
||||
s.flush()
|
||||
time.sleep(0.1)
|
||||
|
||||
end = time.time() + listen
|
||||
while time.time() < end:
|
||||
line = s.readline()
|
||||
if line:
|
||||
sys.stdout.write(line.decode(errors="replace"))
|
||||
sys.stdout.flush()
|
||||
Executable
+47
@@ -0,0 +1,47 @@
|
||||
#!/usr/bin/env python3
|
||||
"""Detect burst energy in a raw rtl_sdr u8 IQ capture.
|
||||
|
||||
Usage: iq_energy.py iq.raw [sample_rate]
|
||||
Prints noise floor, and burst groups >9 dB above floor with 1 ms resolution.
|
||||
Exit code 0 if at least one burst found, 2 otherwise.
|
||||
"""
|
||||
import sys
|
||||
import numpy as np
|
||||
|
||||
path = sys.argv[1]
|
||||
fs = int(sys.argv[2]) if len(sys.argv) > 2 else 1_600_000
|
||||
win = fs // 1000 # 1 ms
|
||||
|
||||
pows = []
|
||||
with open(path, "rb") as f:
|
||||
while True:
|
||||
raw = f.read(fs * 2) # 1 s
|
||||
if len(raw) < win * 2:
|
||||
break
|
||||
buf = np.frombuffer(raw, dtype=np.uint8).astype(np.float32) - 127.5
|
||||
iq = buf[0::2] + 1j * buf[1::2]
|
||||
w = np.abs(iq) ** 2
|
||||
w = w[: (len(w) // win) * win].reshape(-1, win).mean(axis=1)
|
||||
pows.append(w)
|
||||
|
||||
db = 10 * np.log10(np.concatenate(pows) + 1e-9)
|
||||
floor = np.median(db)
|
||||
print(f"windows: {len(db)} x 1ms, floor={floor:.1f} dB, "
|
||||
f"p99={np.percentile(db, 99):.1f}, max={db.max():.1f}")
|
||||
|
||||
idx = np.where(db > floor + 9)[0]
|
||||
groups = []
|
||||
if len(idx):
|
||||
start = prev = idx[0]
|
||||
for i in idx[1:]:
|
||||
if i > prev + 2:
|
||||
groups.append((start, prev))
|
||||
start = i
|
||||
prev = i
|
||||
groups.append((start, prev))
|
||||
|
||||
print(f"burst groups (>9 dB over floor): {len(groups)}")
|
||||
for g in groups[:40]:
|
||||
print(f" t={g[0]/1000:.3f}s dur={g[1]-g[0]+1}ms "
|
||||
f"peak=+{db[g[0]:g[1]+1].max()-floor:.1f}dB")
|
||||
sys.exit(0 if groups else 2)
|
||||
Executable
+39
@@ -0,0 +1,39 @@
|
||||
#!/usr/bin/env python3
|
||||
"""Averaged power spectrum of a raw rtl_sdr u8 IQ capture.
|
||||
|
||||
Usage: iq_spectrum.py iq.raw [sample_rate] [seconds]
|
||||
Prints a coarse ASCII spectrum and the top peaks.
|
||||
"""
|
||||
import sys
|
||||
import numpy as np
|
||||
|
||||
path = sys.argv[1]
|
||||
fs = int(sys.argv[2]) if len(sys.argv) > 2 else 1_600_000
|
||||
secs = float(sys.argv[3]) if len(sys.argv) > 3 else 5.0
|
||||
|
||||
NFFT = 4096
|
||||
acc = np.zeros(NFFT)
|
||||
count = 0
|
||||
with open(path, "rb") as f:
|
||||
raw = f.read(int(fs * 2 * secs))
|
||||
buf = np.frombuffer(raw, dtype=np.uint8).astype(np.float32) - 127.5
|
||||
iq = buf[0::2] + 1j * buf[1::2]
|
||||
n = (len(iq) // NFFT) * NFFT
|
||||
iq = iq[:n].reshape(-1, NFFT)
|
||||
win = np.hanning(NFFT)
|
||||
for row in iq[:2000]:
|
||||
sp = np.fft.fftshift(np.abs(np.fft.fft(row * win)) ** 2)
|
||||
acc += sp
|
||||
count += 1
|
||||
db = 10 * np.log10(acc / count + 1e-9)
|
||||
freqs = np.fft.fftshift(np.fft.fftfreq(NFFT, 1 / fs))
|
||||
|
||||
# collapse to 64 bins for display
|
||||
B = 64
|
||||
cb = db[: (NFFT // B) * B].reshape(B, -1).max(axis=1)
|
||||
lo, hi = cb.min(), cb.max()
|
||||
print(f"spectrum dB range: {lo:.1f} .. {hi:.1f} (span {hi-lo:.1f} dB)")
|
||||
for i, v in enumerate(cb):
|
||||
bar = "#" * int(max(0, (v - lo) / max(1e-9, hi - lo) * 60))
|
||||
fk = freqs[i * (NFFT // B)] / 1e3
|
||||
print(f"{fk:+8.0f} kHz |{bar}")
|
||||
Executable
+103
@@ -0,0 +1,103 @@
|
||||
#!/usr/bin/env python3
|
||||
"""Render a human-readable HIL report from correlate.py JSON.
|
||||
|
||||
Usage: report.py report.json [--min-repeats N] [--min-rx-rate PCT]
|
||||
Exit code 0 = PASS, 1 = FAIL.
|
||||
"""
|
||||
import argparse
|
||||
import json
|
||||
import sys
|
||||
|
||||
ap = argparse.ArgumentParser()
|
||||
ap.add_argument("report")
|
||||
ap.add_argument("--min-repeats", type=int, default=1,
|
||||
help="minimum SDR-verified repeats for PASS")
|
||||
ap.add_argument("--min-rx-rate", type=float, default=0,
|
||||
help="minimum Heltec RX match rate in %% for PASS")
|
||||
ap.add_argument("--duration", type=float, default=0)
|
||||
ap.add_argument("--tx-power", default="?")
|
||||
ap.add_argument("--repeat-delay", default="?")
|
||||
args = ap.parse_args()
|
||||
|
||||
r = json.load(open(args.report))
|
||||
|
||||
d = r.get("repeat_delay_ms") or {}
|
||||
fw = r.get("firmware_events") or {}
|
||||
|
||||
fail_reasons = []
|
||||
if r.get("sdr_originals", 0) == 0:
|
||||
fail_reasons.append("SDR saw no original meter frames")
|
||||
if r.get("heltec_rx", 0) == 0:
|
||||
fail_reasons.append("Heltec received nothing")
|
||||
if r.get("sdr_repeats", 0) < args.min_repeats:
|
||||
fail_reasons.append(
|
||||
f"SDR-verified repeats {r.get('sdr_repeats', 0)} < {args.min_repeats}")
|
||||
if args.min_rx_rate and (r.get("rx_match_rate_pct") or 0) < args.min_rx_rate:
|
||||
fail_reasons.append("RX match rate below threshold")
|
||||
if fw.get("boots", 0) > 1:
|
||||
fail_reasons.append(f"unexpected MCU resets: {fw.get('boots', 0) - 1}")
|
||||
|
||||
verdict = "PASS" if not fail_reasons else "FAIL"
|
||||
|
||||
W = 50
|
||||
print("=" * W)
|
||||
print("SOLENOS WMBUS HIL TEST")
|
||||
print("=" * W)
|
||||
print(f"""
|
||||
DUT:
|
||||
Heltec WiFi LoRa 32 V4.3 (HTIT-WB32LAF)
|
||||
|
||||
RF:
|
||||
frequency: 868.950 MHz
|
||||
mode: C1
|
||||
configured TX power: {args.tx_power} dBm
|
||||
repeat delay: {args.repeat_delay} ms
|
||||
|
||||
TEST:
|
||||
duration: {args.duration:.0f} s
|
||||
|
||||
SDR:
|
||||
frames total: {r.get('sdr_frames_total')}
|
||||
C1 CRC-ok: {r.get('sdr_c1_crc_ok')}
|
||||
originals: {r.get('sdr_originals')}
|
||||
unique meters: {len(r.get('per_meter') or {})}
|
||||
|
||||
HELTEC RX:
|
||||
frames: {r.get('heltec_rx')}
|
||||
crc ok: {r.get('heltec_rx_crc_ok')}
|
||||
matched originals: {r.get('rx_matched')}
|
||||
match rate: {r.get('rx_match_rate_pct')} %
|
||||
|
||||
HELTEC TX:
|
||||
attempts: {r.get('heltec_tx_attempts')}
|
||||
reported success: {r.get('heltec_tx_ok')}
|
||||
|
||||
SDR VERIFIED REPEATS:
|
||||
matched: {r.get('sdr_repeats')}
|
||||
fully correlated: {r.get('fully_correlated_repeats')}
|
||||
success rate: {r.get('repeat_success_rate_pct')} %
|
||||
|
||||
TIMING:
|
||||
median repeat delay: {d.get('median')} ms
|
||||
minimum: {d.get('min')} ms
|
||||
maximum: {d.get('max')} ms
|
||||
|
||||
ERRORS:
|
||||
radio recoveries: {fw.get('recoveries')}
|
||||
MCU boots seen: {fw.get('boots')}
|
||||
""")
|
||||
|
||||
if r.get("per_meter"):
|
||||
print(f"{'METER':>10} {'SDR':>6} {'HELTEC':>7} {'MATCHED':>8}")
|
||||
for m, v in sorted(r["per_meter"].items()):
|
||||
print(f"{m:>10} {v['sdr']:>6} {v['heltec']:>7} {v['matched']:>8}")
|
||||
print()
|
||||
|
||||
if fail_reasons:
|
||||
print("FAIL REASONS:")
|
||||
for fr in fail_reasons:
|
||||
print(f" - {fr}")
|
||||
print()
|
||||
|
||||
print(f"RESULT:\n {verdict}")
|
||||
sys.exit(0 if verdict == "PASS" else 1)
|
||||
Executable
+97
@@ -0,0 +1,97 @@
|
||||
#!/usr/bin/env bash
|
||||
# Full HIL loop: discover -> (build+flash) -> capture serial+SDR -> correlate -> report.
|
||||
#
|
||||
# Usage: ./hil/run.sh [--duration N] [--no-flash] [--tx-power N] [--delay MS]
|
||||
# [--gain G] [--min-repeats N]
|
||||
# Exit: 0 = PASS, nonzero = FAIL (report thresholds or infrastructure error).
|
||||
set -euo pipefail
|
||||
cd "$(dirname "$0")/.."
|
||||
|
||||
DURATION=300
|
||||
FLASH=1
|
||||
TXPOW=-9
|
||||
DELAY=50
|
||||
GAIN=42.1
|
||||
MIN_REPEATS=1
|
||||
while [ $# -gt 0 ]; do
|
||||
case "$1" in
|
||||
--duration) DURATION=$2; shift 2 ;;
|
||||
--no-flash) FLASH=0; shift ;;
|
||||
--tx-power) TXPOW=$2; shift 2 ;;
|
||||
--delay) DELAY=$2; shift 2 ;;
|
||||
--gain) GAIN=$2; shift 2 ;;
|
||||
--min-repeats) MIN_REPEATS=$2; shift 2 ;;
|
||||
*) echo "unknown arg: $1" >&2; exit 2 ;;
|
||||
esac
|
||||
done
|
||||
|
||||
PY=./result-py/bin/python3
|
||||
[ -x "$PY" ] || { echo "run 'nix build .#hil-python -o result-py' first" >&2; exit 2; }
|
||||
|
||||
# 1-2. discover devices (abort on ambiguity)
|
||||
eval "$(./tools/discover_devices.sh)"
|
||||
echo "DUT: $DUT_PORT"
|
||||
echo "SDR: Nooelec NESDR SMArt v5, index $SDR_INDEX, serial $SDR_SERIAL"
|
||||
|
||||
# 3. SDR sanity: reset USB (rtl PLL can wedge; see docs/FINDINGS.md) and
|
||||
# verify the device opens.
|
||||
usbreset 0bda:2838 >/dev/null 2>&1 || true
|
||||
sleep 1
|
||||
|
||||
# 4-6. build + flash + reset
|
||||
if [ "$FLASH" = 1 ]; then
|
||||
(cd firmware && idf.py build) >/dev/null
|
||||
(cd firmware && idf.py -p "$DUT_PORT" flash) >/dev/null 2>&1 || {
|
||||
# port re-enumerates when entering download mode; rediscover once
|
||||
sleep 2
|
||||
eval "$(./tools/discover_devices.sh)"
|
||||
(cd firmware && idf.py -p "$DUT_PORT" flash) >/dev/null
|
||||
}
|
||||
sleep 2
|
||||
eval "$(./tools/discover_devices.sh)"
|
||||
fi
|
||||
|
||||
RUN_DIR="captures/$(date +%Y-%m-%dT%H-%M-%S)-hil"
|
||||
mkdir -p "$RUN_DIR"
|
||||
echo "run dir: $RUN_DIR"
|
||||
|
||||
# 7. configure DUT + start serial capture
|
||||
$PY hil/dut_cmd.py "$DUT_PORT" --listen 2 \
|
||||
"set repeat_delay_ms $DELAY" "set tx_power $TXPOW" "clear_stats" \
|
||||
> "$RUN_DIR/setup.log" 2>&1
|
||||
$PY hil/dut_cmd.py "$DUT_PORT" --listen "$DURATION" status \
|
||||
> "$RUN_DIR/serial.log" 2>&1 &
|
||||
SERIAL_PID=$!
|
||||
|
||||
# 8. SDR capture (timeout applied to rtl_sdr itself; children die with it)
|
||||
./hil/capture_sdr.sh "$DURATION" "$RUN_DIR/rtlwmbus.log" "$GAIN" &
|
||||
SDR_PID=$!
|
||||
|
||||
# 9-12. wait for both collectors
|
||||
wait "$SDR_PID" || true
|
||||
wait "$SERIAL_PID" || true
|
||||
|
||||
# final stats snapshot
|
||||
$PY hil/dut_cmd.py "$DUT_PORT" --listen 3 stats > "$RUN_DIR/final_stats.log" 2>&1 || true
|
||||
cat "$RUN_DIR/final_stats.log" >> "$RUN_DIR/serial.log"
|
||||
|
||||
# 13-14. correlate
|
||||
$PY hil/correlate.py --serial "$RUN_DIR/serial.log" --sdr "$RUN_DIR/rtlwmbus.log" \
|
||||
> "$RUN_DIR/report.json"
|
||||
|
||||
# 15. lockup detection: heartbeats should keep arriving
|
||||
HB=$(grep -c '"event":"heartbeat"' "$RUN_DIR/serial.log" || true)
|
||||
EXPECTED_HB=$((DURATION / 10 - 2))
|
||||
if [ "$HB" -lt "$EXPECTED_HB" ]; then
|
||||
echo "WARNING: only $HB heartbeats seen (expected >= $EXPECTED_HB) - possible lockup" \
|
||||
| tee "$RUN_DIR/lockup_warning.txt"
|
||||
fi
|
||||
|
||||
# 16-18. report
|
||||
$PY hil/report.py "$RUN_DIR/report.json" \
|
||||
--min-repeats "$MIN_REPEATS" --duration "$DURATION" \
|
||||
--tx-power "$TXPOW" --repeat-delay "$DELAY" \
|
||||
| tee "$RUN_DIR/report.txt"
|
||||
RC=${PIPESTATUS[0]}
|
||||
echo "artifacts: $RUN_DIR"
|
||||
exit "$RC"
|
||||
Reference in New Issue
Block a user