firmware: LED heartbeat on GPIO35 (boot/alive/rx/tx/fault patterns), non-blocking
This commit is contained in:
@@ -2,6 +2,7 @@
|
||||
#include "sx126x.h"
|
||||
#include "wmbus.h"
|
||||
#include "board.h"
|
||||
#include "led.h"
|
||||
|
||||
#include <stdio.h>
|
||||
#include <string.h>
|
||||
@@ -142,6 +143,7 @@ static bool radio_full_init(void)
|
||||
static bool recover(const char *reason, int level)
|
||||
{
|
||||
g_stats.recoveries++;
|
||||
led_notify_fault();
|
||||
bool ok = false;
|
||||
switch (level) {
|
||||
case 1:
|
||||
@@ -282,6 +284,7 @@ static const char *do_tx(const uint8_t *payload, int payload_len,
|
||||
}
|
||||
if (irq & SX126X_IRQ_TX_DONE) {
|
||||
g_stats.tx_success++;
|
||||
led_notify_tx();
|
||||
if (*tx_done_us > *tx_start_us) {
|
||||
g_stats.tx_airtime_us += (uint64_t)(*tx_done_us - *tx_start_us);
|
||||
}
|
||||
@@ -477,6 +480,7 @@ static void handle_rx(int64_t rxdone_ts)
|
||||
bool crc_ok = wmbus_check_crc(fmt, frame, total);
|
||||
if (crc_ok) g_stats.rx_valid++; else g_stats.rx_crc_fail++;
|
||||
|
||||
if (crc_ok) led_notify_rx();
|
||||
uint32_t hash = wmbus_hash(frame, total);
|
||||
// RxDone fires after the fixed 255-byte capture; the frame actually
|
||||
// ended earlier. Reconstruct the real end-of-frame time.
|
||||
@@ -563,6 +567,7 @@ static void repeater_task(void *arg)
|
||||
recover_ladder("boot_init_failed");
|
||||
}
|
||||
if (!sx126x_set_rx()) recover_ladder("boot_rx_failed");
|
||||
led_boot_done();
|
||||
|
||||
int64_t last_heartbeat = 0;
|
||||
for (;;) {
|
||||
|
||||
Reference in New Issue
Block a user