Add repeater protocol and device firmware features
This commit is contained in:
@@ -37,3 +37,15 @@
|
||||
|
||||
// Overcurrent protection value from RNode 1.86 ("OCP_TUNED 0x28")
|
||||
#define BOARD_SX1262_OCP 0x28
|
||||
|
||||
// SSD1306 OLED (128x64, I2C 0x3C) + PRG button.
|
||||
// Pins verified against RTNode-HeltecV4 Display.h / Boards.h for this exact
|
||||
// board revision (docs/FUTURE_UI.md). Vext is an ACTIVE-LOW external rail
|
||||
// that powers the display; set once at boot, never toggled mid-TX.
|
||||
#define BOARD_OLED_SDA 17
|
||||
#define BOARD_OLED_SCL 18
|
||||
#define BOARD_OLED_RST 21
|
||||
#define BOARD_VEXT 36
|
||||
// GPIO0 is the BOOT strap pin: input only, sampled well after boot,
|
||||
// debounced. No boot-time gestures (docs/FUTURE_UI.md constraint 3).
|
||||
#define BOARD_BTN_PRG 0
|
||||
|
||||
Reference in New Issue
Block a user