diff --git a/docs/HARDWARE.md b/docs/HARDWARE.md index 0ce9bb1..7920d88 100644 --- a/docs/HARDWARE.md +++ b/docs/HARDWARE.md @@ -41,6 +41,15 @@ Sources: (working firmware for this exact board): https://github.com/jrl290/RTNode-HeltecV4 +## Status LED — GPIO35 (white), EXPERIMENTALLY VERIFIED + +Driven by firmware since the LED-heartbeat build: +solid = booting, 30 ms blip / 2 s = alive in RX, single blink = valid RX, +double blink = repeat transmitted, rapid flash = recovery engaged. +Note: the board has no hardware power LED; before this firmware a powered +board was visually indistinguishable from a dead one, which cost a full +afternoon of RF-only diagnosis (docs/RF_FRONTEND_TESTS.md, FUTURE_UI.md). + ## KCT8103L FEM — DOCUMENTED + EXPERIMENTALLY VERIFIED ```