beacon mode + meter-anchored verification; discovery: intermittent post-chip TX RF death; withdraw single-burst confirmations
This commit is contained in:
@@ -85,3 +85,36 @@ because the sequence of wrong theories is itself a finding.
|
|||||||
identical geometry, cable in vs out (LiPo), antenna close.
|
identical geometry, cable in vs out (LiPo), antenna close.
|
||||||
- Proper antenna A/B (e.g. quarter-wave with radials vs stock whip) --
|
- Proper antenna A/B (e.g. quarter-wave with radials vs stock whip) --
|
||||||
directly relevant to the gateway RF architecture.
|
directly relevant to the gateway RF architecture.
|
||||||
|
|
||||||
|
## Location 3 (evening session) -- the beacon, and the real fault
|
||||||
|
|
||||||
|
Coordinating physical actions with an async agent kept failing (missed
|
||||||
|
timestamps, tuner deaths mid-capture), so we changed instruments: a
|
||||||
|
firmware **beacon mode** (`set beacon_period_ms N`) transmits a synthetic
|
||||||
|
OMS frame (manufacturer SLN, ID 00000001, access_nr = sequence) every N ms.
|
||||||
|
No meter traffic, no serial coordination, dense uniform sampling.
|
||||||
|
|
||||||
|
The beacon caught what two days of repeat-chasing could not:
|
||||||
|
|
||||||
|
- **TX radiated power is intermittent at minute scale.** One 90 s window:
|
||||||
|
0/25 beacons produced ANY RF (max +0.5 dB over floor) while 27 ambient
|
||||||
|
meter frames in the same IQ showed median +26.8 dB (observer healthy) and
|
||||||
|
the chip reported TX_DONE, mode 6, device_errors 0 for every beacon.
|
||||||
|
Thirty minutes later, same boot, same config: repeats, test_tx and
|
||||||
|
beacons all radiated at a constant ~+10 dB.
|
||||||
|
- RX stayed healthy through dead TX windows. Chip-side diagnostics are
|
||||||
|
identical in dead and live states. The fault therefore sits between the
|
||||||
|
SX1262 PA output and the antenna: KCT8103L PA path (CPS/DIO2, CTX, PA
|
||||||
|
supply) or a mechanical/thermal TX-chain fault. Firmware cannot observe
|
||||||
|
it -- exactly the RADIO_VDD_SENSE / conducted-test-port gap in
|
||||||
|
docs/devboard_signals.csv.
|
||||||
|
- **Methodology bug found and fixed:** verify_repeats_iq's single-burst
|
||||||
|
clock fit can lock at -repeat_delay and "confirm" every repeat with its
|
||||||
|
own original's burst. The "7/7 at +37 dB" laptop confirmations were this
|
||||||
|
artifact. Trustworthy methods: structural same-duration pairs at the
|
||||||
|
configured delay, content decodes (duplicate payloads), and
|
||||||
|
hil/meter_anchored.py (clock fitted on strong meter receptions; ambient
|
||||||
|
meter levels double as per-capture observer health).
|
||||||
|
- Positive control: with a healthy observer, 30 structural pairs at
|
||||||
|
137 ms and 35 duplicate decoded payloads in 90 s -- the repeater
|
||||||
|
function itself is solid whenever the TX chain is in its live state.
|
||||||
|
|||||||
@@ -147,6 +147,30 @@
|
|||||||
- Long-run stability at >=100 and >=500 verified repeat events.
|
- Long-run stability at >=100 and >=500 verified repeat events.
|
||||||
- Early-stop RX (poll GetRxBufferStatus) to cut the ~20 ms deaf tail.
|
- Early-stop RX (poll GetRxBufferStatus) to cut the ~20 ms deaf tail.
|
||||||
|
|
||||||
|
## Location 3 follow-up (2026-09-01 evening): intermittent TX RF death
|
||||||
|
|
||||||
|
- CONFIRMED: the DUT's radiated TX output is intermittent on minute scales
|
||||||
|
-- genuinely zero (not weak) for >=10 min windows, then a stable ~+10 dB
|
||||||
|
at the SDR. Verified with beacon mode against in-capture ambient-meter
|
||||||
|
controls (observer healthy: meters +26.8 dB median while 25/25 beacons
|
||||||
|
produced <= +0.5 dB). RX unaffected; chip reports TX_DONE/mode 6/no
|
||||||
|
errors in both states => fault is post-chip (KCT8103L PA path or TX
|
||||||
|
chain), invisible to firmware. Hardware follow-up required; strengthens
|
||||||
|
the RADIO_VDD_SENSE and conducted-RF-test-port devboard requirements.
|
||||||
|
- WITHDRAWN: every single-burst "TX aligned to IQ" confirmation (e.g.
|
||||||
|
"7/7 at +37 dB", "33/41 at +19.3 dB"). verify_repeats_iq's clock fit on
|
||||||
|
TX events can lock at -repeat_delay and match each repeat to its own
|
||||||
|
original's burst. Borrow-immune evidence only: structural same-duration
|
||||||
|
pairs at the configured delay, duplicate content decodes, or
|
||||||
|
hil/meter_anchored.py (meter-anchored clock, exact TX windows).
|
||||||
|
- CONFIRMED: observer health must be judged per capture from ambient meter
|
||||||
|
levels inside the same IQ (meter median >= +15 dB over floor). The
|
||||||
|
Nooelec went deaf mid-session again; runs without this control are void.
|
||||||
|
- CORRECTION to yesterday's "placement dominates": placement governs
|
||||||
|
whether PAIRS are detectable (originals must be SDR-visible), but the
|
||||||
|
standalone invisibility episodes are better explained by the intermittent
|
||||||
|
TX death now that it has been directly observed under controls.
|
||||||
|
|
||||||
## Field test 2026-09-01 (onsite standalone deployment)
|
## Field test 2026-09-01 (onsite standalone deployment)
|
||||||
|
|
||||||
Full narrative with the evidence table: docs/FIELD_TEST_2026-09-01.md.
|
Full narrative with the evidence table: docs/FIELD_TEST_2026-09-01.md.
|
||||||
|
|||||||
@@ -3,6 +3,7 @@
|
|||||||
// status | stats | clear_stats | radio_status | radio_reset | test_tx
|
// status | stats | clear_stats | radio_status | radio_reset | test_tx
|
||||||
// set repeat_delay_ms N | set tx_power N | set repeat_enabled 0|1
|
// set repeat_delay_ms N | set tx_power N | set repeat_enabled 0|1
|
||||||
// set verbose 0|1 | set whitelist ID[,ID...] | set whitelist clear
|
// set verbose 0|1 | set whitelist ID[,ID...] | set whitelist clear
|
||||||
|
// set beacon_period_ms N (0=off, uses test_lfield) | set duty_budget_ppm N
|
||||||
// reboot
|
// reboot
|
||||||
#include <stdio.h>
|
#include <stdio.h>
|
||||||
#include <string.h>
|
#include <string.h>
|
||||||
@@ -49,6 +50,11 @@ static void handle_set(char *args)
|
|||||||
if (v < 0 || v > 100000) { ack("set", false, "range 0..100000 ppm"); return; }
|
if (v < 0 || v > 100000) { ack("set", false, "range 0..100000 ppm"); return; }
|
||||||
g_cfg.duty_budget_ppm = (uint32_t)v;
|
g_cfg.duty_budget_ppm = (uint32_t)v;
|
||||||
ack("set duty_budget_ppm", true, v == 0 ? "guard disabled" : NULL);
|
ack("set duty_budget_ppm", true, v == 0 ? "guard disabled" : NULL);
|
||||||
|
} else if (strcmp(key, "beacon_period_ms") == 0) {
|
||||||
|
long v = strtol(val, NULL, 10);
|
||||||
|
if (v != 0 && (v < 250 || v > 600000)) { ack("set", false, "0 or 250..600000 ms"); return; }
|
||||||
|
g_cfg.beacon_period_ms = (uint32_t)v;
|
||||||
|
ack("set beacon_period_ms", true, v == 0 ? "beacon off" : NULL);
|
||||||
} else if (strcmp(key, "preamble_bits") == 0) {
|
} else if (strcmp(key, "preamble_bits") == 0) {
|
||||||
long v = strtol(val, NULL, 10);
|
long v = strtol(val, NULL, 10);
|
||||||
uint8_t code;
|
uint8_t code;
|
||||||
|
|||||||
@@ -27,6 +27,7 @@ repeater_cfg_t g_cfg = {
|
|||||||
// environment, so the experiment enforces the budget itself rather than
|
// environment, so the experiment enforces the budget itself rather than
|
||||||
// relying on traffic being sparse. See docs/STANDARDS_GAPS.md.
|
// relying on traffic being sparse. See docs/STANDARDS_GAPS.md.
|
||||||
.duty_budget_ppm = 1000, // 1000 ppm = 0.1 %
|
.duty_budget_ppm = 1000, // 1000 ppm = 0.1 %
|
||||||
|
.beacon_period_ms = 0,
|
||||||
.tx_power_dbm = -9,
|
.tx_power_dbm = -9,
|
||||||
.repeat_enabled = true,
|
.repeat_enabled = true,
|
||||||
#ifdef CONFIG_WMBUS_VERBOSE_DEFAULT
|
#ifdef CONFIG_WMBUS_VERBOSE_DEFAULT
|
||||||
@@ -49,6 +50,7 @@ static volatile int s_inject; // 1 = standby, 2 = sleep (config loss)
|
|||||||
static uint8_t s_test_access_nr;
|
static uint8_t s_test_access_nr;
|
||||||
static uint8_t s_test_lfield = 19;
|
static uint8_t s_test_lfield = 19;
|
||||||
static uint32_t s_seq;
|
static uint32_t s_seq;
|
||||||
|
static int64_t s_last_beacon;
|
||||||
|
|
||||||
static struct { uint32_t hash; int64_t ts; } s_dup[DUP_RING];
|
static struct { uint32_t hash; int64_t ts; } s_dup[DUP_RING];
|
||||||
static int s_dup_idx;
|
static int s_dup_idx;
|
||||||
@@ -347,6 +349,39 @@ static void run_test_tx(void)
|
|||||||
sx126x_restore_rx_payload_len();
|
sx126x_restore_rx_payload_len();
|
||||||
if (!sx126x_set_rx()) recover_ladder("test_tx_rx_restore");
|
if (!sx126x_set_rx()) recover_ladder("test_tx_rx_restore");
|
||||||
}
|
}
|
||||||
|
// Periodic synthetic OMS beacon: standalone RF measurements without meter
|
||||||
|
// traffic or serial coordination. access_nr doubles as sequence number and
|
||||||
|
// is recoverable from every SDR-side decode (SLN manufacturer, ID 00000001).
|
||||||
|
// Respects the duty guard; suppressed beacons skip to the next period.
|
||||||
|
static void run_beacon(void)
|
||||||
|
{
|
||||||
|
uint8_t frame[256];
|
||||||
|
uint8_t acc = s_test_access_nr++;
|
||||||
|
int n = wmbus_build_test_frame(frame, sizeof(frame), acc, s_test_lfield);
|
||||||
|
if (n < 0) return;
|
||||||
|
uint64_t duty_used = 0, duty_budget = 0;
|
||||||
|
if (duty_would_exceed(esp_timer_get_time(), n + 2, &duty_used, &duty_budget)) {
|
||||||
|
g_stats.tx_suppressed_duty++;
|
||||||
|
LOGJ("\"event\":\"beacon_suppressed\",\"reason\":\"duty_cycle\","
|
||||||
|
"\"used_us\":%llu,\"budget_us\":%llu",
|
||||||
|
(unsigned long long)duty_used, (unsigned long long)duty_budget);
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
static uint8_t payload[258];
|
||||||
|
payload[0] = WMBUS_MODE_BYTE_A_HI;
|
||||||
|
payload[1] = WMBUS_MODE_BYTE_A_LO;
|
||||||
|
memcpy(payload + 2, frame, n);
|
||||||
|
|
||||||
|
int64_t t0, t1;
|
||||||
|
const char *res = do_tx(payload, n + 2, &t0, &t1);
|
||||||
|
if (t1 > t0) duty_record(t0, (uint32_t)(t1 - t0));
|
||||||
|
LOGJ("\"event\":\"beacon\",\"acc\":%u,\"lfield\":%u,\"result\":\"%s\","
|
||||||
|
"\"timestamp_us\":%lld,\"tx_done_us\":%lld",
|
||||||
|
acc, s_test_lfield, res, (long long)t0, (long long)t1);
|
||||||
|
|
||||||
|
sx126x_restore_rx_payload_len();
|
||||||
|
if (!sx126x_set_rx()) recover_ladder("beacon_rx_restore");
|
||||||
|
}
|
||||||
|
|
||||||
// Transmit the SAME frame twice, separated by repeat_delay_ms. This
|
// Transmit the SAME frame twice, separated by repeat_delay_ms. This
|
||||||
// reproduces the original+repeat timing pattern without needing a meter,
|
// reproduces the original+repeat timing pattern without needing a meter,
|
||||||
@@ -614,6 +649,13 @@ static void repeater_task(void *arg)
|
|||||||
LOGJ("\"event\":\"irq_other\",\"mask\":%u", irq);
|
LOGJ("\"event\":\"irq_other\",\"mask\":%u", irq);
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
if (g_cfg.beacon_period_ms) {
|
||||||
|
int64_t bnow = esp_timer_get_time();
|
||||||
|
if (bnow - s_last_beacon >= (int64_t)g_cfg.beacon_period_ms * 1000) {
|
||||||
|
s_last_beacon = bnow;
|
||||||
|
run_beacon();
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
int64_t now = esp_timer_get_time();
|
int64_t now = esp_timer_get_time();
|
||||||
if (now - last_heartbeat > 10000000LL) {
|
if (now - last_heartbeat > 10000000LL) {
|
||||||
@@ -658,6 +700,7 @@ void repeater_print_status(void)
|
|||||||
"\"repeat_delay_ms\":%" PRIu32 ",\"configured_tx_dbm\":%d,"
|
"\"repeat_delay_ms\":%" PRIu32 ",\"configured_tx_dbm\":%d,"
|
||||||
"\"repeat_enabled\":%s,\"verbose\":%s,\"whitelist_len\":%d,"
|
"\"repeat_enabled\":%s,\"verbose\":%s,\"whitelist_len\":%d,"
|
||||||
"\"preamble_detect_code\":%u,\"duty_budget_ppm\":%" PRIu32 ","
|
"\"preamble_detect_code\":%u,\"duty_budget_ppm\":%" PRIu32 ","
|
||||||
|
"\"beacon_period_ms\":%" PRIu32 ","
|
||||||
"\"duty_used_us\":%llu,\"reset_reason\":%d",
|
"\"duty_used_us\":%llu,\"reset_reason\":%d",
|
||||||
(long long)esp_timer_get_time(),
|
(long long)esp_timer_get_time(),
|
||||||
g_cfg.repeat_delay_ms, (int)g_cfg.tx_power_dbm,
|
g_cfg.repeat_delay_ms, (int)g_cfg.tx_power_dbm,
|
||||||
@@ -666,6 +709,7 @@ void repeater_print_status(void)
|
|||||||
g_cfg.whitelist_len,
|
g_cfg.whitelist_len,
|
||||||
sx126x_get_preamble_detect(),
|
sx126x_get_preamble_detect(),
|
||||||
g_cfg.duty_budget_ppm,
|
g_cfg.duty_budget_ppm,
|
||||||
|
g_cfg.beacon_period_ms,
|
||||||
(unsigned long long)duty_used_us(esp_timer_get_time()),
|
(unsigned long long)duty_used_us(esp_timer_get_time()),
|
||||||
(int)esp_reset_reason());
|
(int)esp_reset_reason());
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -26,6 +26,7 @@ typedef struct {
|
|||||||
typedef struct {
|
typedef struct {
|
||||||
uint32_t repeat_delay_ms; // 20..200
|
uint32_t repeat_delay_ms; // 20..200
|
||||||
uint32_t duty_budget_ppm; // rolling-hour TX airtime cap, 0 = disabled
|
uint32_t duty_budget_ppm; // rolling-hour TX airtime cap, 0 = disabled
|
||||||
|
uint32_t beacon_period_ms; // periodic synthetic test frame, 0 = off
|
||||||
int8_t tx_power_dbm; // configured SX1262 level, not radiated power
|
int8_t tx_power_dbm; // configured SX1262 level, not radiated power
|
||||||
bool repeat_enabled;
|
bool repeat_enabled;
|
||||||
bool verbose;
|
bool verbose;
|
||||||
|
|||||||
Executable
+151
@@ -0,0 +1,151 @@
|
|||||||
|
#!/usr/bin/env python3
|
||||||
|
"""Meter-anchored TX verification.
|
||||||
|
|
||||||
|
The only trustworthy way we have found to verify DUT transmissions in IQ:
|
||||||
|
|
||||||
|
1. Fit the serial<->IQ clock offset using STRONG METER RECEPTIONS as anchors
|
||||||
|
(independent events, visible to both DUT and SDR, abundant).
|
||||||
|
2. Judge each firmware TX event by the envelope inside its EXACT window.
|
||||||
|
3. Report ambient meter levels alongside -- they are the in-band health
|
||||||
|
control for the observer (deaf dongle => meters compressed => run void).
|
||||||
|
|
||||||
|
Why not fit the clock on TX events (hil/verify_repeats_iq.py, single-burst
|
||||||
|
mode): repeats fire RX + delay by construction, so an offset shifted by
|
||||||
|
-delay "matches" every repeat to its own original's burst. That artifact
|
||||||
|
produced fake "7/7 at +37 dB" confirmations. See docs/FINDINGS.md.
|
||||||
|
|
||||||
|
Usage: meter_anchored.py --iq FILE --serial FILE [--json]
|
||||||
|
"""
|
||||||
|
import argparse, json, sys
|
||||||
|
import numpy as np
|
||||||
|
|
||||||
|
FS = 1600000
|
||||||
|
WIN = FS // 1000 # 1 ms envelope bins
|
||||||
|
|
||||||
|
|
||||||
|
def envelope(path):
|
||||||
|
raw = np.fromfile(path, dtype=np.uint8).astype(np.float32) - 127.5
|
||||||
|
iq = raw[0::2] + 1j * raw[1::2]
|
||||||
|
p = np.abs(iq) ** 2
|
||||||
|
env = p[:(len(p) // WIN) * WIN].reshape(-1, WIN).mean(axis=1)
|
||||||
|
db = 10 * np.log10(env + 1e-9)
|
||||||
|
return db, float(np.median(db))
|
||||||
|
|
||||||
|
|
||||||
|
def bursts_of(db, floor, thresh=5):
|
||||||
|
idx = np.where(db > floor + thresh)[0]
|
||||||
|
if not len(idx):
|
||||||
|
return []
|
||||||
|
out, s, p0 = [], idx[0], idx[0]
|
||||||
|
for i in idx[1:]:
|
||||||
|
if i > p0 + 3:
|
||||||
|
out.append((s, p0))
|
||||||
|
s = i
|
||||||
|
p0 = i
|
||||||
|
out.append((s, p0))
|
||||||
|
return [(a, b - a + 1, float(db[a:b + 1].max() - floor))
|
||||||
|
for a, b in out if (b - a + 1) >= 3]
|
||||||
|
|
||||||
|
|
||||||
|
def parse_serial(path):
|
||||||
|
rx, tx = [], []
|
||||||
|
for line in open(path, errors="replace"):
|
||||||
|
for tag, dst in (("wmbus_rx", rx), ("wmbus_tx", tx), ("beacon", tx)):
|
||||||
|
if f'"event":"{tag}"' in line:
|
||||||
|
try:
|
||||||
|
dst.append(json.loads(line[line.index("{"):]))
|
||||||
|
except (ValueError, KeyError):
|
||||||
|
pass
|
||||||
|
break
|
||||||
|
return rx, tx
|
||||||
|
|
||||||
|
|
||||||
|
def fit_clock(bursts, anchors_ms, span_ms):
|
||||||
|
bst = np.array([b[0] for b in bursts], dtype=float)
|
||||||
|
best = (None, -1, 1e9)
|
||||||
|
for off in np.arange(anchors_ms[0] - span_ms - 3000, anchors_ms[0] + 3000, 2):
|
||||||
|
d = [np.min(np.abs(bst - (t - off))) for t in anchors_ms]
|
||||||
|
m = sum(1 for x in d if x < 15)
|
||||||
|
e = float(np.median(d))
|
||||||
|
if m > best[1] or (m == best[1] and e < best[2]):
|
||||||
|
best = (off, m, e)
|
||||||
|
return best # offset, matched, median_err
|
||||||
|
|
||||||
|
|
||||||
|
def main():
|
||||||
|
ap = argparse.ArgumentParser()
|
||||||
|
ap.add_argument("--iq", required=True)
|
||||||
|
ap.add_argument("--serial", required=True)
|
||||||
|
ap.add_argument("--rssi-min", type=float, default=-65,
|
||||||
|
help="anchor threshold: DUT-side RSSI of meter frames")
|
||||||
|
ap.add_argument("--json", action="store_true")
|
||||||
|
args = ap.parse_args()
|
||||||
|
|
||||||
|
db, floor = envelope(args.iq)
|
||||||
|
bursts = bursts_of(db, floor)
|
||||||
|
rx, tx = parse_serial(args.serial)
|
||||||
|
strong = [r for r in rx
|
||||||
|
if r.get("rssi_dbm", -99) > args.rssi_min and r.get("timestamp_us")]
|
||||||
|
if len(strong) < 5:
|
||||||
|
print(f"only {len(strong)} strong meter anchors -- cannot fit clock",
|
||||||
|
file=sys.stderr)
|
||||||
|
sys.exit(2)
|
||||||
|
|
||||||
|
anchors = np.array([r["timestamp_us"] / 1000.0 for r in strong])
|
||||||
|
span = len(db)
|
||||||
|
off, matched, err = fit_clock(bursts, anchors, span)
|
||||||
|
|
||||||
|
bst = np.array([b[0] for b in bursts], dtype=float)
|
||||||
|
meter_lv = []
|
||||||
|
for t in anchors:
|
||||||
|
k = int(np.argmin(np.abs(bst - (t - off))))
|
||||||
|
if abs(bst[k] - (t - off)) < 15:
|
||||||
|
meter_lv.append(bursts[k][2])
|
||||||
|
|
||||||
|
def winmax(ts_ms):
|
||||||
|
a0, a1 = int(ts_ms) - 2, int(ts_ms) + 12
|
||||||
|
if not (0 <= a0 < a1 < len(db)):
|
||||||
|
return None
|
||||||
|
return float((db[a0:a1] - floor).max())
|
||||||
|
|
||||||
|
events = []
|
||||||
|
for t in tx:
|
||||||
|
w = winmax(t["timestamp_us"] / 1000.0 - off)
|
||||||
|
if w is None:
|
||||||
|
continue
|
||||||
|
events.append({"event": t.get("event", "wmbus_tx"),
|
||||||
|
"result": t.get("result"),
|
||||||
|
"window_db": round(w, 1),
|
||||||
|
"rf": bool(w >= 6)})
|
||||||
|
|
||||||
|
meter_med = float(np.median(meter_lv)) if meter_lv else 0.0
|
||||||
|
observer = "ok" if meter_med >= 15 else ("degraded" if meter_med >= 8 else "deaf")
|
||||||
|
n_rf = sum(1 for e in events if e["rf"])
|
||||||
|
report = {
|
||||||
|
"clock_matched": f"{matched}/{len(strong)}",
|
||||||
|
"clock_err_ms": round(err, 1),
|
||||||
|
"floor_db": round(floor, 1),
|
||||||
|
"meter_median_db": round(meter_med, 1),
|
||||||
|
"observer": observer,
|
||||||
|
"tx_events": len(events),
|
||||||
|
"tx_with_rf": n_rf,
|
||||||
|
"tx_levels_db": [e["window_db"] for e in events],
|
||||||
|
}
|
||||||
|
if args.json:
|
||||||
|
print(json.dumps(report, indent=2))
|
||||||
|
else:
|
||||||
|
print(f"clock: {report['clock_matched']} anchors, err {report['clock_err_ms']} ms")
|
||||||
|
print(f"observer: {observer} (meter median +{report['meter_median_db']} dB, "
|
||||||
|
f"floor {report['floor_db']})")
|
||||||
|
print(f"TX with RF: {n_rf}/{len(events)}")
|
||||||
|
for e in events:
|
||||||
|
print(f" {e['event']:>9} {e['result'] or '':>10} "
|
||||||
|
f"+{e['window_db']:>5.1f} dB {'RF' if e['rf'] else '--'}")
|
||||||
|
# exit 3 = observer unusable, 1 = TX dead while observer ok
|
||||||
|
if observer == "deaf":
|
||||||
|
sys.exit(3)
|
||||||
|
sys.exit(0 if (n_rf or not events) else 1)
|
||||||
|
|
||||||
|
|
||||||
|
if __name__ == "__main__":
|
||||||
|
main()
|
||||||
Reference in New Issue
Block a user