firmware: config-integrity check, fault injection, verified recovery ladder; soak harness
This commit is contained in:
Executable
+29
@@ -0,0 +1,29 @@
|
||||
#!/usr/bin/env bash
|
||||
# Long unattended reliability soak of the repeater firmware (DUT only).
|
||||
#
|
||||
# No SDR: this measures firmware-side reliability (TX success, recoveries,
|
||||
# MCU resets, timing stability) over hours. The RTL-SDR cannot stream that
|
||||
# long without faulting (docs/HARDWARE.md), and SDR verification of the RF
|
||||
# is demonstrated separately by hil/run.sh.
|
||||
#
|
||||
# Usage: soak.sh [SECONDS]
|
||||
set -euo pipefail
|
||||
cd "$(dirname "$0")/.."
|
||||
DUR=${1:-9000}
|
||||
PY=./result-py/bin/python3
|
||||
|
||||
eval "$(./tools/discover_devices.sh)"
|
||||
OUT="captures/$(date +%Y-%m-%dT%H-%M-%S)-soak"
|
||||
mkdir -p "$OUT"
|
||||
echo "DUT: $DUT_PORT"
|
||||
echo "duration: ${DUR}s -> $OUT"
|
||||
|
||||
$PY hil/dut_cmd.py "$DUT_PORT" --listen 3 \
|
||||
"set repeat_enabled 1" "set repeat_delay_ms 200" "clear_stats" \
|
||||
> "$OUT/setup.log" 2>&1
|
||||
|
||||
$PY hil/dut_cmd.py "$DUT_PORT" --listen "$DUR" status > "$OUT/serial.log" 2>&1
|
||||
$PY hil/dut_cmd.py "$DUT_PORT" --listen 5 stats >> "$OUT/serial.log" 2>&1
|
||||
|
||||
$PY hil/soak_report.py "$OUT/serial.log" "$DUR" | tee "$OUT/report.txt"
|
||||
echo "artifacts: $OUT"
|
||||
Reference in New Issue
Block a user