fix: TCXO XOSC_START_ERR handling, always apply config, register DIO1 ISR callback; TX proof of life confirmed by SDR
This commit is contained in:
@@ -0,0 +1,18 @@
|
||||
# Open Questions
|
||||
|
||||
- Optimal SX1262 RX bandwidth for C1: 234.3 kHz chosen (signal ~190 kHz
|
||||
incl. tolerances); would 156 kHz improve sensitivity without clipping
|
||||
drifted meters?
|
||||
- Preamble detector length: 8 bits chosen for sensitivity; false-sync rate
|
||||
in the field? (false syncs cost ~20 ms deaf time each at fixed-255 RX).
|
||||
- Does the KCT8103L LNA help or hurt with strong 868 MHz interferers?
|
||||
(see planned docs/RF_FRONTEND_TESTS.md)
|
||||
- RX dead time during retransmit: measured distribution?
|
||||
- Can the SX1262 re-arm RX fast enough to catch a meter's immediate
|
||||
follow-up telegram after our TX?
|
||||
- Exact production repeater framing/hop requirements (EN 13757-5).
|
||||
- Regulatory duty-cycle budget for a production repeater at 868.95 MHz.
|
||||
- Modulation shaping for TX: none vs GFSK BT=0.5 — which does rtl-wmbus /
|
||||
real receivers prefer? (TX currently unshaped 2-FSK.)
|
||||
- Why did the R820T PLL wedge? (usbreset workaround in place; root cause
|
||||
unknown, suspected rtl_test direct-sampling probe.)
|
||||
Reference in New Issue
Block a user