# Open Questions - Optimal SX1262 RX bandwidth for C1: 234.3 kHz chosen (signal ~190 kHz incl. tolerances); would 156 kHz improve sensitivity without clipping drifted meters? - Preamble detector length: 8 bits chosen for sensitivity; false-sync rate in the field? (false syncs cost ~20 ms deaf time each at fixed-255 RX). - Does the KCT8103L LNA help or hurt with strong 868 MHz interferers? (see planned docs/RF_FRONTEND_TESTS.md) - RX dead time during retransmit: measured distribution? - Can the SX1262 re-arm RX fast enough to catch a meter's immediate follow-up telegram after our TX? - Exact production repeater framing/hop requirements (EN 13757-5). - Regulatory duty-cycle budget for a production repeater at 868.95 MHz. - Modulation shaping for TX: none vs GFSK BT=0.5 — which does rtl-wmbus / real receivers prefer? (TX currently unshaped 2-FSK.) - Why did the R820T PLL wedge? (usbreset workaround in place; root cause unknown, suspected rtl_test direct-sampling probe.)