// Status LED: makes "powered" and "repeating" visible without any USB host. // Exists because a standalone unit is otherwise a black box (docs/FUTURE_UI.md, // and one full afternoon of RF-only guessing that a glance would have solved). // // Patterns (white LED, GPIO35): // boot : solid ON until the radio initialises, then OFF // alive : 30 ms blip every 2 s (radio in RX, nothing heard recently) // rx valid : one 40 ms blink // tx (repeat) : double blink // fault : rapid 100 ms flashing for 5 s (recovery ladder engaged) // // The radio task only sets flags; all timing lives in a low-priority task so // the LED can never perturb RX/TX timing. #pragma once void led_init(void); // GPIO setup + pattern task; LED solid ON void led_boot_done(void); // switch from solid-on to heartbeat patterns void led_notify_rx(void); void led_notify_tx(void); void led_notify_fault(void);