#!/usr/bin/env bash # KCT8103L LNA (CSD) A/B experiment - Heltec only, no SDR required. # # Runs two equal-length RX-only windows on the same meter population, one # with the FEM enabled in RX (CSD high, LNA path) and one with it disabled # (CSD low), then reports frame counts, CRC success and RSSI distribution. # # Usage: lna_ab.sh [SECONDS_PER_ARM] set -euo pipefail cd "$(dirname "$0")/.." DUR=${1:-600} PY=./result-py/bin/python3 eval "$(./tools/discover_devices.sh)" OUT="captures/$(date +%Y-%m-%dT%H-%M-%S)-lna-ab" mkdir -p "$OUT" echo "DUT: $DUT_PORT" echo "arm duration: ${DUR}s each" # Retransmission off: this measures the receiver only, and avoids radiating # during a sensitivity comparison. for arm in 1 0; do label=$([ "$arm" = 1 ] && echo "csd_high_lna" || echo "csd_low_bypass") echo "--- arm: $label" $PY hil/dut_cmd.py "$DUT_PORT" --listen 3 \ "set repeat_enabled 0" "set fem_rx_csd $arm" "clear_stats" radio_reset \ > "$OUT/$label.setup.log" 2>&1 sleep 3 $PY hil/dut_cmd.py "$DUT_PORT" --listen "$DUR" status \ > "$OUT/$label.log" 2>&1 $PY hil/dut_cmd.py "$DUT_PORT" --listen 4 stats >> "$OUT/$label.log" 2>&1 done # restore normal operation $PY hil/dut_cmd.py "$DUT_PORT" --listen 3 \ "set fem_rx_csd 1" "set repeat_enabled 1" radio_reset \ > "$OUT/restore.log" 2>&1 $PY hil/lna_report.py "$OUT" | tee "$OUT/report.txt" echo "artifacts: $OUT"