# Reliability ## Soak result (final firmware, `captures/2026-09-01T11-34-08-soak`) Repeater running unattended, no SDR involved, repeat delay 200 ms, duty-cycle guard at 0.1 %. ``` duration : 5 460 s (1 h 31 m), stopped early by operator firmware uptime at end : 5 521 s MCU boots seen : 0 (no unexpected resets) heartbeats : 526 (all chip_mode=5, config_intact=true) RX candidate frames : 1 082 RX CRC-valid frames : 388 TX attempts : 380 TX success : 380 (100.0 %) TX timeouts / failures : 0 / 0 repeat delay : 200.001 ms min, 200.001 median, 200.006 max TX airtime : 10.2 / 13.4 / 14.9 ms (min/median/max) radio recoveries : 0 heartbeats not in RX : 0 heartbeats config lost : 0 duty-cycle suppressions : 8 (guard working as designed) ``` ## Milestones (firmware-reported repeats, no restart) | Milestone | Target | Status | |---|---|---| | A | >= 10 verified retransmissions | **REACHED** (380) | | B | >= 100 | **REACHED** (380) | | C | >= 500 | not reached (run stopped early at 380) | | D | >= 1000 | not reached | Milestone C needs roughly 2 h at the observed rate, or longer once the duty-cycle guard caps output at ~268 repeats/hour. The run was ended early by operator request; nothing in the data suggests it would not continue -- the last heartbeat was as healthy as the first, with zero recoveries and zero resets across 1.5 h. To continue: ``` nix develop --command ./hil/soak.sh 9000 ``` ## Duty-cycle guard behaviour At the observed traffic rate the repeater wants ~320 repeats/hour, which at 13.4 ms measured airtime each is ~0.12 % -- above the 0.1 % ceiling for 868.7-869.2 MHz. The guard suppressed 8 repeats to stay inside the budget (`used_us` 3 594 561 against `budget_us` 3 600 000) and reported a final `tx_duty_cycle_ppm` of 905, i.e. 0.0905 %. See docs/STANDARDS_GAPS.md. ## What has NOT been demonstrated - >= 500 consecutive verified repeats (Milestone C) -- run ended early. - Multi-hour operation with the SDR observing simultaneously: the dongle cannot stream that long without faulting (docs/HARDWARE.md), which is why the soak is deliberately DUT-only.