Files
heltec-repeater/firmware/main/Kconfig.projbuild
T

28 lines
951 B
Plaintext

menu "wM-Bus repeater"
config WMBUS_VERBOSE_DEFAULT
bool "Verbose diagnostics enabled at boot"
default n
help
Emit dropped-frame reasons, suppressed duplicates, rx_ready timing
and unexpected-IRQ events by default. Can always be toggled at
runtime with "set verbose 0|1".
config WMBUS_TX_DIAG_ALWAYS
bool "Always emit tx_diag after every transmission"
default n
help
Logs polled IRQ state, DIO1 level, chip mode and device errors for
every TX. Useful when bringing up a new board revision; adds one
serial line per repeat, which perturbs timing measurements.
config WMBUS_LOG_RAW_FRAMES
bool "Include raw frame hex in wmbus_rx / wmbus_tx events"
default y
help
Required by the HIL correlator to compare bytes against the SDR.
Disable only for a quiet production-style build; doing so makes
hil/correlate.py unable to match frames.
endmenu