Files

60 lines
2.1 KiB
Bash
Executable File

#!/usr/bin/env bash
# Capture wM-Bus frames with the RTL-SDR for a fixed duration.
# Usage: capture_sdr.sh DURATION_S OUTFILE [GAIN]
#
# Robustness notes (see docs/FINDINGS.md):
# - timeout is applied to rtl_sdr itself; killing a wrapping shell orphans
# the children and keeps the device claimed.
# - "[R82XX] PLL not locked!" during tuning is BENIGN noise emitted while
# rtl_sdr probes/disables direct-sampling mode. It is NOT a wedge
# indicator; do not reset on it.
# - The real failure is "Library error -5" (USB transfer death) which ends
# the stream early. We restart until the deadline and record the total
# streaming time so the report can tell "SDR was deaf" from "no traffic".
set -euo pipefail
cd "$(dirname "$0")/.."
DUR=$1; OUT=$2; GAIN=${3:-42.1}
: > "$OUT"
ERR="${OUT%.log}.err"
STATS="${OUT%.log}.stats"
: > "$ERR"
# Verify the observer is actually receiving before trusting any capture.
health_ok=0
for i in 1 2 3; do
if ./result-py/bin/python3 hil/sdr_health.py >> "$ERR" 2>&1; then
health_ok=1; break
fi
echo "--- SDR unhealthy; usbreset (try $i)" >> "$ERR"
usbreset 0bda:2838 >> "$ERR" 2>&1 || true
sleep $((i * 5))
done
echo "sdr_health_ok=$health_ok" > "${OUT%.log}.health"
deadline=$(( $(date +%s) + DUR ))
attempt=0
streamed=0
while :; do
now=$(date +%s)
remaining=$(( deadline - now ))
[ "$remaining" -le 3 ] && break
attempt=$((attempt + 1))
echo "--- rtl_sdr attempt $attempt (${remaining}s remaining)" >> "$ERR"
t0=$(date +%s)
timeout "$remaining" rtl_sdr -f 868950000 -s 1600000 -g "$GAIN" - 2>>"$ERR" \
| rtl_wmbus -f >> "$OUT" 2>/dev/null || true
t1=$(date +%s)
streamed=$(( streamed + t1 - t0 ))
remaining=$(( deadline - t1 ))
if [ "$remaining" -gt 3 ]; then
echo "--- stream died after $((t1 - t0))s; usbreset + settle" >> "$ERR"
usbreset 0bda:2838 >> "$ERR" 2>&1 || true
sleep 4
fi
done
printf 'streamed_seconds=%s\nrequested_seconds=%s\nattempts=%s\n' \
"$streamed" "$DUR" "$attempt" > "$STATS"
echo "--- streamed ${streamed}s of ${DUR}s in $attempt attempt(s)" >> "$ERR"