Files
heltec-repeater/firmware/main/led.h
T

21 lines
928 B
C

// Status LED: makes "powered" and "repeating" visible without any USB host.
// Exists because a standalone unit is otherwise a black box (docs/FUTURE_UI.md,
// and one full afternoon of RF-only guessing that a glance would have solved).
//
// Patterns (white LED, GPIO35):
// boot : solid ON until the radio initialises, then OFF
// alive : 30 ms blip every 2 s (radio in RX, nothing heard recently)
// rx valid : one 40 ms blink
// tx (repeat) : double blink
// fault : rapid 100 ms flashing for 5 s (recovery ladder engaged)
//
// The radio task only sets flags; all timing lives in a low-priority task so
// the LED can never perturb RX/TX timing.
#pragma once
void led_init(void); // GPIO setup + pattern task; LED solid ON
void led_boot_done(void); // switch from solid-on to heartbeat patterns
void led_notify_rx(void);
void led_notify_tx(void);
void led_notify_fault(void);