40 lines
1.4 KiB
Bash
Executable File
40 lines
1.4 KiB
Bash
Executable File
#!/usr/bin/env bash
|
|
# Controlled A/B of one runtime RF parameter, receiver-only (no SDR).
|
|
#
|
|
# Changes exactly one variable between two equal-length arms on the same
|
|
# meter population, with retransmission disabled so the receiver is measured
|
|
# in isolation. Meter traffic varies, so only large differences mean
|
|
# anything -- the report says so explicitly.
|
|
#
|
|
# Usage: param_ab.sh KEY VALUE_A VALUE_B [SECONDS_PER_ARM]
|
|
# e.g. param_ab.sh preamble_bits 8 16 900
|
|
# param_ab.sh fem_rx_csd 1 0 600
|
|
set -euo pipefail
|
|
cd "$(dirname "$0")/.."
|
|
KEY=$1; VA=$2; VB=$3; DUR=${4:-900}
|
|
PY=./result-py/bin/python3
|
|
|
|
eval "$(./tools/discover_devices.sh)"
|
|
OUT="captures/$(date +%Y-%m-%dT%H-%M-%S)-ab-$KEY"
|
|
mkdir -p "$OUT"
|
|
echo "DUT: $DUT_PORT"
|
|
echo "variable: $KEY arms: $VA vs $VB ${DUR}s each"
|
|
|
|
for V in "$VA" "$VB"; do
|
|
label="${KEY}_${V}"
|
|
echo "--- arm: $label"
|
|
$PY hil/dut_cmd.py "$DUT_PORT" --listen 4 \
|
|
"set repeat_enabled 0" "set $KEY $V" "clear_stats" \
|
|
> "$OUT/$label.setup.log" 2>&1
|
|
sleep 4
|
|
$PY hil/dut_cmd.py "$DUT_PORT" --listen "$DUR" status > "$OUT/$label.log" 2>&1
|
|
$PY hil/dut_cmd.py "$DUT_PORT" --listen 5 stats >> "$OUT/$label.log" 2>&1
|
|
done
|
|
|
|
# restore
|
|
$PY hil/dut_cmd.py "$DUT_PORT" --listen 4 \
|
|
"set $KEY $VA" "set repeat_enabled 1" > "$OUT/restore.log" 2>&1
|
|
|
|
$PY hil/param_ab_report.py "$OUT" "$KEY" "$VA" "$VB" | tee "$OUT/report.txt"
|
|
echo "artifacts: $OUT"
|