docs: LED patterns
This commit is contained in:
@@ -41,6 +41,15 @@ Sources:
|
||||
(working firmware for this exact board):
|
||||
https://github.com/jrl290/RTNode-HeltecV4
|
||||
|
||||
## Status LED — GPIO35 (white), EXPERIMENTALLY VERIFIED
|
||||
|
||||
Driven by firmware since the LED-heartbeat build:
|
||||
solid = booting, 30 ms blip / 2 s = alive in RX, single blink = valid RX,
|
||||
double blink = repeat transmitted, rapid flash = recovery engaged.
|
||||
Note: the board has no hardware power LED; before this firmware a powered
|
||||
board was visually indistinguishable from a dead one, which cost a full
|
||||
afternoon of RF-only diagnosis (docs/RF_FRONTEND_TESTS.md, FUTURE_UI.md).
|
||||
|
||||
## KCT8103L FEM — DOCUMENTED + EXPERIMENTALLY VERIFIED
|
||||
|
||||
```
|
||||
|
||||
Reference in New Issue
Block a user